Yasin TPE 85A Black 1.75mm 500g

Yasin TPE 85A Black 1.75mm 500g

3,230 kr
Skip to product information
Yasin TPE 85A Black 1.75mm 500g
  • Yasin TPE 85A Black 1.75mm 500g
  • Yasin TPE 85A Black 1.75mm 500g
Yasin TPE 85A Black 1.75mm 500g

Yasin TPE 85A Black 1.75mm 500g

3,230 kr

Yasin TPE (Thermoplastic Elastomer 85A Shore hardness) can be thought of as a "rubber band" material. It is softer and more rubber-like than a typical TPU

Note: For best print quality, we recommend drying before use.

📊 Technical Specifications

Nozzle Temperature 210-230 °C *
Bed Temperature 30-50 °C *
Print Speed 15-40 mm/s *
Part Cooling Fan 50-100 % *
Max Volumetric Speed 7.2 mm³/s *
Drying Temperature 50 °C *
Drying Time 5 hours *
Enclosure Required No *
Tensile Strength (Yield, XY) 11 MPa
Tensile Strength (Yield, Z) 5 MPa *
Tensile Strength (Break, XY) 10.1 MPa *
Tensile Strength (Break, Z) 4.5 MPa *
Tensile Modulus (XY) 2 MPa
Tensile Modulus (Z) 1.2 MPa *
Elongation at Break 600 %
Flexural Strength (XY) 14.9 MPa *
Flexural Strength (Z) 8.2 MPa *
Flexural Modulus (XY) 1.9 MPa *
Flexural Modulus (Z) 1.2 MPa *
Impact Strength (Izod) 200 J/m *
Impact Strength (Unnotched, XY) 8 kJ/m² *
Impact Strength (Unnotched, Z) 3.2 kJ/m² *
Heat Deflection (0.45 MPa) 69 °C *
Heat Deflection (1.8 MPa) 60 °C *
Glass Transition (Tg) -40 °C *
Melting Point 191-246 °C
Density 0.9 g/cm³
Hardness (Shore A) 85
Hardness (Shore D) 40 *
Hardness (Rockwell R) 78 *
Continuous Service Temp 60 °C *
Light Transmittance 0 % *
Dielectric Strength 18 kV/mm *
Impact Strength (Charpy) 2 kJ/m² *
Elongation at Yield 10 % *
Mold Shrinkage 1-1 % *
Water Absorption (24h) 1 % *
Flammability Rating HB *
Bed Adhesion Glue Stick *

* Estimated values based on material family characteristics

📋 Documentation

You may also like