yxpolyer PLA Bronze Metallic 1.75mm 1kg

yxpolyer PLA Bronze Metallic 1.75mm 1kg

3,590 kr
Skip to product information
yxpolyer PLA Bronze Metallic 1.75mm 1kg
  • yxpolyer PLA Bronze Metallic 1.75mm 1kg
  • yxpolyer PLA Bronze Metallic 1.75mm 1kg
yxpolyer PLA Bronze Metallic 1.75mm 1kg

yxpolyer PLA Bronze Metallic 1.75mm 1kg

3,590 kr

Matte PLA features a low-gloss, velvety surface finish that hides layer lines and gives printed parts a refined, non-reflective appearance. Prints at standard PLA temperatures with the same ease as regular PLA. Ideal for architectural models, display pieces, and parts where a subdued aesthetic is desired.

📊 Technical Specifications

Nozzle Temperature 190-230 °C
Bed Temperature 50-60 °C
Print Speed 30-300 mm/s *
Part Cooling Fan 100 % *
Max Volumetric Speed 16 mm³/s *
Drying Temperature 45 °C *
Drying Time 6 hours *
Enclosure Required No *
Tensile Strength (Yield, XY) 53 MPa
Tensile Strength (Yield, Z) 34.5 MPa *
Tensile Strength (Break, XY) 53 MPa
Tensile Strength (Break, Z) 34.5 MPa *
Tensile Modulus (XY) 3500 MPa *
Tensile Modulus (Z) 2520 MPa *
Elongation at Break 1.8 %
Flexural Strength (XY) 82 MPa
Flexural Strength (Z) 32 MPa
Flexural Modulus (XY) 3104 MPa
Flexural Modulus (Z) 2394 MPa
Impact Strength (Izod) 18 J/m *
Impact Strength (Unnotched, XY) 15 kJ/m²
Impact Strength (Unnotched, Z) 4.8 kJ/m²
Heat Deflection (0.45 MPa) 55 °C
Heat Deflection (1.8 MPa) 55 °C *
Glass Transition (Tg) 55 °C
Melting Point 154 °C
Density 1.2 g/cm³
Hardness (Shore A) 57.6 *
Hardness (Shore D) 48.2 *
Hardness (Rockwell R) 106 *
Continuous Service Temp 50 °C *
Light Transmittance 5 % *
Dielectric Strength 15 kV/mm *
Impact Strength (Charpy) 16 kJ/m² *
Elongation at Yield 4 % *
Mold Shrinkage 0-0 % *
Water Absorption (24h) 0.3 % *
Flammability Rating HB *
Bed Adhesion PEI *

* Estimated values based on material family characteristics

📋 Documentation

You may also like